View Full Version : ESrun 80amp in Savage X?

08-10-2009, 08:42 PM
Want to convert my savage x to brushless because the e-savage just can't take the abuse of brushless.So was thinking for putting my 80amp EZrun with 3665 2300kv motor in my savage x.Will this be underpowered or will it work?Know there is more than enough power in the e-savage!

08-10-2009, 09:21 PM
It will work. The motor is about the right size, and the esc is pretty strong. I might swap in the bigger 150 amp model to be on the safe side. The x is a bigger hungrier machine :)

08-11-2009, 07:05 AM
True on the size.This is just to get it up and running.Will go 150amp with 80mm motor in the future!

08-11-2009, 04:29 PM
You can also try the 4465SL 2000kv motor with the 150A ESC. That should give plenty of torque. I've seen vids online of the 4665SL motor in Emaxxs and its strong! The 80A might work with the 4665SL but the 150Awould be the safer choice.

08-14-2009, 02:26 PM
i have the 150amps version with the 2200kv castle motor and i love it.
it works great.