PDA

View Full Version : 1offRC ANODIZED 5mm XL TVP KIT LASER CUT


1offrc
01-05-2010, 03:48 PM
Hello this is Janeth of 1offRC.com
As of today 01-05-2010 my Savage Flux XL TVP plates will be cut using a brand new Laser Cutter and I will have two Sizes to offer
They will be made from 6061-T6 Aluminum in either
0.125" or 3.175mm for $80usd
0.190" or 5mm for new LOWER PRICE $110usd
I ship world wide using USPS Priority Shipping Online Calculator.
All TVP Kits come with EVERYTHING you will need to turn your Flux To a Flux XL 2 Heavy Duty TVP's 1 Extended Heavy duty Dog-Bone and 1 Template to locate the 2 5/16" holes in the rear bed of the stock body shell.
I can anodize these TVP's and any stock or aftermarket Aluminum or Titanium parts to about any color (anodized titanium has no true red or Black)
Any Questions or Quotes email 1offRC@gmail.com

generis
01-05-2010, 03:59 PM
Great job.. keep it up!

BitHed
01-06-2010, 01:31 AM
...ummm...

...Some pictures would be nice or dont we deserve them? :)

generis
01-06-2010, 01:54 AM
OMG it's Bit!?!!
jah, pics would be great!

BitHed
01-06-2010, 01:58 AM
...well at least

1offRC.com

...will get you to the site :) not a lot of eye candy though...

1offrc
01-07-2010, 04:09 AM
Here are som pictures of my flux with My RED 1offRC Flux XL TVP's and I have re-anodized all the purple aluminum to RED .

the last few pictures are of the parts I just did today fresh out of the Laser the production runs will go threw deburr before anodizind

http://i694.photobucket.com/albums/vv303/1offrc/DSC01021.jpg

http://i694.photobucket.com/albums/vv303/1offrc/DSC01024.jpg

http://i694.photobucket.com/albums/vv303/1offrc/DSC01595.jpg

http://i694.photobucket.com/albums/vv303/1offrc/DSC01609.jpg

1offrc
01-07-2010, 04:13 AM
a few more

http://i694.photobucket.com/albums/vv303/1offrc/DSC01615.jpg

http://i694.photobucket.com/albums/vv303/1offrc/DSC01613.jpg

http://i694.photobucket.com/albums/vv303/1offrc/DSC01606.jpg

http://i694.photobucket.com/albums/vv303/1offrc/DSC01612.jpg

larsenracing
01-07-2010, 05:34 PM
Looking good. Whats the weight on the XL FLUX plates?

1offrc
01-10-2010, 04:51 AM
Hi Jason I will Get a weight for you. did you want the 3mm or 5mm weight?

1offrc
01-10-2010, 04:52 AM
So I am playing around with the idea of longer hardware kits (Phillips or Allen head? steel or stainless steel?) for the thicker TVP's or Counter boring for the screw heads. Here are some pictures of some scrap TVP's I was testing on. What do you think and like?

http://i694.photobucket.com/albums/vv303/1offrc/DSC01633.jpg

http://i694.photobucket.com/albums/vv303/1offrc/DSC01624.jpg

BitHed
01-10-2010, 05:03 AM
...hex heads...counter-sunk...stainless steel...

OR cap heads but flat heads end up looking MUCH cleaner ;)

larsenracing
01-10-2010, 08:08 PM
In my experiences go steel Cap Head (Hex Drive) Grade 12.9. Stainless is so soft and strip easily with use. Stainless looks sick but doesn't last with wrenching.

With the 3mm kits the stock screws will work fine. The 5mm kit is pushing it but the stock screws will still work fine but wouldn't hurt to have an optional kit with longer screws. In most cases you can find 2 or 3mm longer screws, there are quite a few sizes like 10, 12, 14, 15, 16, 18 lengths and so on.

generis
01-11-2010, 01:28 PM
ditto larsen on the screws. hex cap head black oxide. stay away from the stainless for durability with a hex head.

DARKWAV
01-16-2010, 12:00 AM
I think 5mm bored to accept socket head cap screws looks nice.

Just a thought...how about using right side plates (or a left side plate with the same outer perimeter as the right side plate) with ESC relocation mount (low and behind the motor in the extended area) for a symmetrical look?

e-ransom
01-16-2010, 05:17 AM
[QUOTE=1offrc;50128]So I am playing around with the idea of longer hardware kits (Phillips or Allen head? steel or stainless steel?) for the thicker TVP's or Counter boring for the screw heads. Here are some pictures of some scrap TVP's I was testing on. What do you think and like?

yes the counter boring looks great maybe not quite so deep
it does mean you would have to do left and right sets

you could send some of those "scrap" ones out for "testing"

DARKWAV
01-18-2010, 08:35 PM
Also think the battery box mount locations need to be recessed on the outside with the thick TVPs since it is already hard enough to nicely fit a body to the truck due to width.

frddyj
01-19-2010, 05:48 PM
your work is sweet 1offrc

1offrc
01-20-2010, 05:00 AM
Thank you all for the great advice and input on my 1offRC Savage Flux XL TVP's.
I do like the socket cap Head screws they look very tough.
I have redesigned the ESC relocation plate and my servo and receiver plate and will have pictures of those very soon. The ESC plate now fits lower between the extension area. I am making those from aluminum and titanium just like the skid plates I make for my 1offRC Flux XL TVP's and the HPI Savage nitro XL.

1offrc
02-19-2010, 03:16 PM
Here is a picture of the stock TVP's 6.3oz and 1offRC TVP's 8.9oz difference 2.6oz


http://i694.photobucket.com/albums/vv303/1offrc/DSC00211-1.jpg

http://i694.photobucket.com/albums/vv303/1offrc/DSC00213-1.jpg

Knez
02-19-2010, 04:56 PM
And how much would that be in grams ?
Oz i dont even know wtf that means... u need to look at it international:) !
:rolleyes:


Tvps do look very NICE!

FluxCapacitorSavage
02-19-2010, 11:50 PM
1offrc TVP's are 252 grams, Knez.

Stockers are 179 grams.

Knez
02-20-2010, 01:00 AM
Thanks a lot FCS!

Aero007
06-17-2011, 11:18 AM
Here is a picture of the stock TVP's 6.3oz (179g) and 1offRC TVP's 8.9oz difference 2.6oz (252g)


http://i694.photobucket.com/albums/vv303/1offrc/DSC00211-1.jpg

http://i694.photobucket.com/albums/vv303/1offrc/DSC00213-1.jpg

that looks to be 3mm chassises'

whats the weight of 5mm 1offrc extended tvp's ? or stock savage xl tvp chassis ? trying to compare some tvp weights..