GCM diff cup question

[FAB ESAV]

What is the size of the set screw for the GCM CVD cup? I need to get 4 replacements as the ones I have are missing them.

Also need to get the machine screws to attach the lower shocks to an SS ex-arm kit. The length of those M3 screws would be cool to know. I think they are suppose to be 15mm but not sure (missing those 4 screws as well).

Lastly, anyone know when I can get some super cheap dogbone covers??? Nothing fancy, don't need to be alloy or anything like that. The stock parts would be cool but can't seem to find any on e-bay lately and I am missing these 2 covers?

thx!

[nvtuning]

3mm

greets nvt

[FAB ESAV]

Thanks NV, I assume the 3MM is the length of the set screws for the diff output cups?

[generis]

this is the one that replaces the stockers or the GCM drive cup set-screw-pins
http://www3.towerhobbies.com/cgi-bin...?&I=LXUTF4&P=7

[FAB ESAV]

Thanks Chris, but I have 1 more queestion (as usual )

HPI lists the stocker set pins (P# 82045) as M4x2x12mm but the Traxxas ones listed are 4x13mm. Is the extra 1mm length because the GCM output cups are thicker?

[generis]

they both work, but the stocker pin is a bit short. Nothing you would notice from a usage point of view, but the traxxas ones are cheap and work great, that's all.

[FAB ESAV]

Cool that's what I thought as well but I thought it may be good to ask.

Thanks again! Will post some progress pics once I get the last of these little pieces in...now to find those dam dogbone covers...