e-savage wheelie?

[jacob360bonds]

Hi, i have just bought a new stock e-savage and am just wondering when i full throttle it should it be doing a wheelie?

[esavage]

if want wheelies, easiest way is to tighten slipper clutch, the big gear the motors spin round'. start with fully tightened then loosen by 1/4 turn counter clockwise until you can wheelie. Or buy better batteries/BL motor..
Becareful, wheelies like to snap the plastic drive shafts..

[nvtuning]

or you can pop harder springs in the back that worked for me

greets nvt

[jacob360bonds]

thanks for the reply what would you say would be a reasonable tightness (how many turns) for the slipper clutch to be done up.

what tightness are you running on your truck?

[esavage]

manual says to go fully tightened, then loosen but 3/4 a turn.

[jacob360bonds]

will test this out when the batteries are charged. the settings on mine was about 2 1/2 turns!!!!!

thanks for the help!

[jacob360bonds]

finished testing i have it about 2/3 of a turn (so wheels are skimming ground at full throttle)
what wheelie bar would you recommend?

[Aero007]

this one work nicely http://www.youtube.com/watch?v=oZnZSD0f6pk
comes with two wheels, for different wheelie angles